Bose L1 Model 1S Powered Line Array Speaker system + B2 Bass Module + T1 ToneMatch!
PLEASE CALL FOR BEST PRICING!
If you have any questions about this product, Please call. We would love to tell you more about how it works and its advantages over a conventional speaker system.
The Bose L1 system offers a unique combination of performance and portability for an audience of up to 300. With a 12-speaker articulated line array providing 180 degrees of clear, even, sound, the system is also designed to work with the T1 ToneMatch® audio engine as well as a choice in bass modules. Easy to transport, and set up in minutes.
Put your PA behind you
The vertical configuration of the system's small, closely spaced drivers allows the L1 Model 1S system to project sound forward and to the sides—delivering 180-degree coverage—but very little up and down, reducing unwanted reverberation. This produces consistent tonal balance as sound spreads more evenly across the stage and into the audience, and the volume level drops off much more slowly than with a conventional speaker.
Unique Bose® technologies enable the system to serve as both PA and monitor. It can be positioned behind or to the side of the performer—and you hear just what the audience hears. You're in control, and there's no need for conventional monitors, mixers and PA systems.
Convenience to go
The three components of the L1 Model 1S system—upper array, lower extension and power stand—connect quickly and easily without the need for separate speaker stands. Setup and breakdown take just minutes. And everything stores neatly into the included carry bags, making transport easy too.
Full, flexible bass
The high-performance B2 bass module delivers greater low-frequency output when you need more powerful bass for larger audiences. The module includes three settings for increased flexibility. The normal setting is ideal for bass guitar or when miking a kick drum. A higher setting is designed for DJ/music playback applications. And the lower setting works well for acoustic guitar and vocals.
Powerful multichannel audio engine
Combining the T1 ToneMatch audio engine with your L1 system expands your options to connect additional instruments and microphones. You can also use the ToneMatch engine to fine-tune your sound with powerful, proprietary tone-shaping tools.
The compact, four-channel engine provides fingertip control of a library of ToneMatch presets. Just touch a button to make hundreds of precise refinements to the sound of instruments and microphones. The engine also features a complete suite of studio-class reverbs, additional effects and dynamics processing. It connects to the L1 Model 1S system via a single digital cable for quick, streamlined setup.
This Bose L1 Model 1S Pachage Includes:
L1 Model 1S top array
43.5"H x 3.5"W x 4"D ( 111 cm x 9 cm x 10.5 cm )
16.3 lbs (7.4 kg)
L1 Model 1S bottom extension
39.63"H x 4.15"W x 4.13"D ( 100.6 cm x 10.6 cm x 10.5 cm )
8.5 lbs (3.8 kg)
L1 Model 1S power stand
5"H x 10"W x 27"D ( 12.8 cm x 26.2 cm x 69.2 cm )
23.7 lbs (10.7 kg)
B2 bass module
23.4"H x 13.31"W x 18.9"D ( 59.4 cm x 33.8 cm x 48 cm )
25.1 lbs (11.4 kg)T1 ToneMatch
2.67"H x 6.5"W x 8.25"D ( 6.76 cm x 16.6 cm x 20.9 cm )
2.1 lbs (1 kg)Key Features
Driver Compliment: Top array loudspeaker: Twelve (12) 2.25" (57 mm) HF drivers
B1 bass module: Two (2) 5.25" (133 mm) LF drivers (8 Ω)
Signal Indicators: Analog signal/clip LED: Green: signal present, Yellow: -3 dB below clip, Red: clip (limiter active)
Trim: +14 dB @ max
Input: 1/4" - TS unbalanced or TRS balanced
Channel Gain (1/4" input): -50 dB to +28 dB (line)
Maximum Input Signal: +24 dBu (balanced)
Input Impedance: 10 kΩ +/- 10 % (unbalanced)
Bass Module out (for B1 or B2 only): NL4 connector (all pins wired, two for auto sensing). Bass output signal for driving up to two B1 bass modules (1 B1 bass module = 8 Ω) (2 B1
bass modules = 4 Ω) or one B2 bass module (4Ω)
ToneMatch Port : CAT5 Ethernet cable with RJ45 connection providing digital audio and power connection for the optional T1 ToneMatch audio engine
AC Mains: IEC connector
Other items you might be interested in: